Hartha Unit-1 Rehabilitation project consists of rehabilitation of instruments and control system of turbine and boiler, rehabilitation of generator and electrical equipments, rehabilitation of boiler runs on 4 types of fuel, rehabilitation of turbine and increase the output of generator to its original value 200 MW and extend the lifetime of the boiler, turbine and generator to 10 years.
EPC Contract for Boufarik 750 MW Simple Cycle Power Plant is undertaken on a turnkey basis.
GAMA Power Systems undertakes the responsibility of supply and erection of 3 GE 9FA gas turbines, main equipments as well as HV switchyard and all balance of plant equipments and spare parts including basic & detail design of the power plant, civil works, structural, electromechanical works erection, installation of electrical, instrumentation & control systems, test and commissioning, start-up works and training of the Employer’s personnel.
With its completion the plant will generate energy around 4,000 GWh per year which will have a significant contribution to energy production in Algeria and provide electricity to more than 1 million dwellings by improving energy security in the country.
POSCO E&C signed an EPC Contract with Ministry of Electricity of Northern Iraq Regional Government for a 2×150 MW thermal power plant with 2 Fuel Oil/Diesel Fuel Oil Boiler and 2 Steam Turbine & Generator sets. GAMA Power Systems signed a sub-contractor agreement with POSCO E&C. Design and Procurement of Boiler, Steam Turbine, Condenser, FGD and Feed water pump is in the POSCO E&C’s Scope. POSCO designed Main Steam and design and procurement of Boiler, Steam Turbine, Condenser, FGD, Distributed Control System (DCS) and Boiler Feed Water pumps has been commenced by POSCO E&C.
Except above mentioned systems, design and procurement of project mechanical and electrical BOP Systems, all buildings and underground works are executed by GAMA Power Systems. Additionally, GAMA Power Systems executed the construction and erection works at site.
With its completion the plant generates energy around 1,600 GWh per year which have a significant contribution to energy production in Iraq and improve energy security in the country.
EPC Contract for 1800 MW ALBA Line 6 Expansion, Power Station 5 Project is undertaken on a turnkey basis.
The Project scope consists of engineering, procurement and construction of three GE 9 HA.01 Gas Turbines and three GE A650 Steam Turbines with 1x1x1 multishaft configuration. GAMA Power Systems is responsible for engineering and procurement of all BOP systems and overall construction works. Commissioning scope is limited with Consortium members’ own scope of supply systems only.
With the investment of the largest and most efficient power plant in Bahrain; 1800 MW Combined Cycle Power Plant project, Employer Aluminium Bahrain B.S.C. (ALBA), targets to provide energy for the new “Smelter Expansion” project as well as development of the current power supply units with the new technology gas turbines providing higher efficiency. The energy to be provided to the new “Smelter Expansion” project will lead ALBA to be the largest aluminium smelter in the world.
Installation of Power Island ME&I and Equipment at 1800 MW Power Plant PP13 is undertaken by GAMA Power Systems as construction contractor.
Project Scope consisted of electromechanical installations, pre-commissioning of 6 ea 7FA Gas Turbine, associated Generator and Heat Recovery Steam Generator (HRSG), 6ea. 2ea GE Reheat Double Flow D11 type Steam Turbine, 5ea Generator Step-Up Transformers (GSU), 2ea Air Cooled Condenser Units (each of the units consisted of 42 cells), and installation of Balance of Plant works together E&IC as well as the Process Buildings. In addition, the EPC responsibility of 380 kV GIS Unit as turnkey basis, i.e. engineering, procurement, installation and commissioning of GIS was under GAMA’s scope.
The project is completed within the scope agreed with the Employer in October 2019.
EPC Contract for 450 MW Rades C Combined Cycle Power Plant is undertaken on a turnkey basis.
GAMA Power Systems scope includes; supply of RMS (Reducing and Measuring System), Gas Compressor, Auxiliary Boiler, Liquid Fuel System, Desalination System, Water Treatment Plant, Fire Fighting and Detection System, Transformers, By-pass Stack and in addition to this scope design of all buildings and related infrastructures is under the scope of GAMA. All procurement, design, civil and electromechanical construction-assembly and commissioning works related to these equipments are to be carried out by GAMA.
The increased power demands in Tunisia, with its completion the plant will make a big contribution.
Hartha Unit-4 Rehabilitation project consists of rehabilitation of instruments and control system of turbine and boiler, rehabilitation of generator and electrical equipments, rehabilitation of boiler runs on 4 types of fuel, rehabilitation of turbine and increase the output of generator to its original value 200 MW and extend the lifetime of the boiler, turbine and generator to 10 years.
GAMA Power Systems performed all mechanical erection works & rehabilitation works and installation & rehabilitation of all electrical, instrumentation and control systems.
EPC Contract for Hamitabat 1200 MW Natural Gas Combined Cycle Power Plant is implemented on a turnkey basis.
The Plant is comprised in two units. Each unit is based on a single-shaft configuration, comprising of one gas turbine, one steam turbine, one generator (SGT5-8000H Gas Turbine, SST5-5000 Steam Turbine, SGen5-3000W Generator) and one Heat Recovery Steam Generator. The units are utilizing the existing dry cooling towers as a part of cooling system. Electricity is transferred to the grid via the existing substation which was refurbished.
EPC Contract’s scope covers procurement of all major equipment as well as other auxiliary equipment and conceptual and detail engineering of the plant, civil and electro-mechanical installation works, test and commissioning works, and training of the Employer’s staff.
EPC Contract for Modernization of 390 MW Kazanskaya CHPP-3 is implemented on a turnkey basis.
Modernization of Kazan CHPP-3 envisages delivery and installation of 1 piece of GE 9HA 01 gas turbine, 1 piece of GE H28.56 generator, 1 piece of CMI double-pressure HRSG.
EPC Contract’s scope covers procurement of all major equipment as well as other auxiliary equipment, and conceptual and detail engineering of the plant, civil and electro-mechanical installation works, test and commissioning works and training of the Employer’s staff.
Construction of a Combined Cycle Power Plant (CCPP) in Kırıkkale, Turkey with a total power output of 853 MW is realized for İç Anadolu Doğalgaz Elektrik Üretim ve Ticaret A.Ş. is implemented on a turnkey basis.
GE STAG 209 9FB MS, is used in the power plant which is designed for 30 years lifespan. GAMA Power Systems and GE Energy as consortium undertakes the responsibility of supply and erection of 2 GE 9FB gas turbines, 1 GE steam turbines, 2 Doosan HRSG’s, Air Cooled Condenser, 380 kV HV switchyard as well as all balance of plant equipment under an EPC contract. Within this scope, basic & detail design of the power plant, civil works, structural, electro mechanical works, erection, installation of electrical, instrumentation & control systems, test and commissioning, start-up works and training of the Employer’s personnel performed in the course of project.
İç Anadolu Combined Cycle Power Plant generates about 6,300 GWh Energy which corresponds 2.5% of total national Energy consumption and almost 50% of Ankara’s energy consumption.